Loading ...
Loading ...
Loading ...
SANTOS: User and maintenance manual
98165 EN 1.1 - 03 2018 11 / 19 www.santos.fr
• Check: the presence of the feed channel (3) and the locking of the cover (2) in the
lowered position Fig.13
THE MACHINE STOPS BECAUSE THE MOTOR HAS OVERHEATED:
(the casings around the motor units are hot)
- Remove the plug from the power supply socket and follow the instructions in the section
on “motor overheat safety feature".
THE MACHINE STOPS BECAUSE OF A JAM:
See the section on “jamming"
THE MACHINE IS NOISY:
- Check the parts are positioned correctly
- Check no part has been damaged by a fall or the suchlike:
if so, replace this part.
Loading ...
Loading ...
Loading ...