INSTALLATION:
C-34
09/17PENDANT LIGHT
1. Install the length of rod
that is required by threading
wire through the rod and
screwing it to the fixture.
Install swivel to the rod,
ensuring that the sleeve is at
the swivel.
2. NOTE: Refer to the style of
assembly that matches the
style of your fixture.
Style#1-2:
Mount the
mounting bracket to electrical
box using electrical box screws
(not included). Make sure the
studs on the mounting bracket
are facing out from the
electrical box.
3. Connect the ground wires
(bare copper or green) from
your fixture to the ground wire
(bare copper or green) or
ground screw in the electrical
box. Connect the black wire
from the fixture to the black
wire in the electrical box and
connect the white wire from
the fixture to the white wire in
the electrical box.
4. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
outlet box making sure no bare
wire (on the black and white) is
visible at the wire nuts.
Screw
Fixture
Sleeve
Rod
Swivels
(optional)
STYLE#1
STYLE#2
Mounting Bracket
Ground
wire
Mounting
bracket
Star
Washer
Cap
Nut
Fixture
STYLE#2
STYLE#1
Fixture
Bracket
Screw
5. Style#1: Tuck electrical wires
into electrical box and position
fixture over studs on mounting
bracket assembly. Secure fixture in
place with star washer(s) and cap
nut(s).
Style#2: Insert one screw into
the mounting bracket - do not
tighten yet. Tuck electrical wires
into outlet box and position
fixture over the mounting
bracket. Line up the screw in the
bracket to to the "7" hole on the
fixture. Slide fixture to secure in
place. Insert remaining screw.
Tighten both screws to secure.
6. Style#1: Remove spinner
nut from socket. Position shade
on lamp and secure with spinner
nut.
Style#2: Remove the finishing
screws that are already on your
fixture. Position glass in place and
secure with finishing screws.
Style#3: Remove spinner nut
from socket. Position glass on
lamp and secure with spinner nut.
7. Install proper bulb type and
wattage (not included).
8. Install the glass by 3 screws as
shown.
Spinner
Nut
Cap
Fixture
Socket
Shade
Spinner
Nut
STYLE#1
STYLE#3
STYLE#2
Fixture
Socket
Glass
Glass
Shade
Or
Finishing
Screws
SAFETY PRECAUTIONS:
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
Pliers Wrench
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Wiring supplies
as required by
local electrical
code
Electrical
Box
Electrical
Box
Electrical
Box Screws
(not included)
Electrical
Box Screws
(not included)
White
Black
House supply
Ground wire
Fixture
Ground wire
Stud
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
5. CLEAN GLASS WITH WATER ONLY.
NOTE: Product may not look exactly as shown in figures.
Tel: (613) 342-5424, Fax: (800) 263-4598
