Loading ...
Loading ...
Loading ...
OPEB£T GTHE DUAL$UBFACEBAD £HTELEB E TS
[] t [] [] _ [] [] [] [] [] [] _ [] _ [] [] 1 [] _ [] [] []
Both the 30" and 36" cooktops are equipped with dual
radiant surface elements located at the right & left
front positions (See Figs, 1 & 2), Symbo]s around the
knob are used to indicate which coil of the dual radiant
element will heat, The ® symbol indicates that only
the inner coil wiii heat (Fig, 3), The ® symbol indicates
that both inner and outer coils will heat (Fig, 4), You
may switch from either coil setting at any time during Fig. 1 Fig. 2
cooking.
To Operate the Dual Surface
1. Place correctly sized cookware on the dual surface
element,
2. Push in and turn thecontrol knob counterclockwise
(See Figs. 3 & 5) for smallercookware or clockwise
(See Figs. 4& 6) for larger cookware to the desired
setting using the ESEC digital display window for
the desired setting.
3. Turn the knob to adjust the setting as needed.
Start most cooking operations on a higher setting
and then turn to a lower setting to finish cooking.
Each surface element provides aconstant amount
of heat at each setting. A glowing red surface
heating area extending beyond the bottom edge of
the cookware indicates the cookware is too
small for the surface heating area.
4. When cooking has completed, turn the surface
control knob to OFF before removing the cookware.
Fig. 3 Fig. 4
Fig. 5 Fig. 6
Loading ...
Loading ...
Loading ...