INSTALLATION WARNING SHEET FOR
STACKING KIT WITH BELT
*
*
*
*
84cm
60cm
2961460061-REV:2
This product is designed for the installation of the Dryer on the Washing
Machine only. Using it on other items shall render your product out of
warranty cover.
Before installation, check if there are any sharp edges in the areas where
the belt passes through. During the initial installation and in case of re-in-
stallation, check for any damage on the belt and do not use damaged belts.
A clearance of 1cm at least shall be allowed on the left and right of the
machines after the installation with the belt; and no surface shall contact
with the belt.
Tightening reference line (!) on the belt has been adjusted for machines
with dimensions of 60cm x 84cm. If the dimensions of your machine are
diļ¬erent, ignore the reference line, tighten the belt so that the belt shall
be tight and the kit shall not move. After tightening the belt tightly, check
that the belt buckle is locked by pulling on the belt.
If your washing machine or dryer shall be serviced, they shall not be
serviced without disassembling the kit. If the kit is installed by the service,
re-installation after service shall also be performed by the Authorized
Service. If the taped parts of the kit have been removed, new tape shall be
used during re-installation.
