Loading ...
Loading ...
Loading ...
52
At the end of the cooking time, the oven switches off all loads, a triple intermittent buzzer
of medium intensity sounds, the display shows the time, the cavity symbol ashes. To
unlock the oven, simply press any button on the programmer: the buzzer ends and the
oven is ready to receive new instructions.
The maximum temperature varies depending on the type of function. When turned on,
the oven is given a default temperature for each function: the cooking temperature can
be changed. Turning the knob [T] slightly clockwise increases the temperature (in 5 °C
steps), counter clockwise decreases the temperature (in 5 °C steps). During temperature
setting (ashing display) you can change the unit of measurement from °C to °F and
vice versa by holding down the knob [T] for 8’’.
The oven light remains on for 1 minute when the oven is turned on, and again for 1
minute at the end of preheating. Whilst waiting for a delayed start, the oven light is off.
The oven light can always be turned on by pressing knob [T] and turns off automatically
after 1 minute.
During cooking, you can always leave the light on by pressing the knob [T] for 3 seconds.
The oven is equipped with a safety device that prevents unwanted or accidental starting.
To activate the safety: with oven off press and hold knob [T] for 3 seconds. A short beep
sounds and the screen displays the symbol “n-0”. In this situation it is impossible to
start the oven. To remove the previously activated safety, keep knob[T] pressed for 3
seconds.
N.B. Cooking with probe cannot be used in the “DEFROST”, “QUICK START”, “PIZZA”
and “ECO” functions. When the oven is in stand-by insert the meat probe into the
connecting socket on the right hand wall of the oven: the clock displays “MEAt” for 2
seconds and the “probe” symbol ashes. Next the probes default temperature(75°C)
appears on the display. By turning and then pressing the adjustment button, select the
end of cooking temperature from the 2 limit values of 40° and 100°C (the food’s internal
temperature). After 4 seconds from the last setting, the set value is memorized and the
probe symbol stays on. Turn on the oven, select the cooking function and the desired
temperature using the appropriate knobs. The display will show the probes temperature
reading.
Upon reaching the programmed temperature the oven will turn off, a buzzer sounds and
the display shows the message “End” and you enter the cooking over mode.
During cooking it is always possible to change the probes temperature by pressing and
then turning the adjustment knob 3 times.
NOTE: If you insert the probe into the special socket during cooking, the oven will turn
off and “Off” appears on the display.
If, during cooking, the probe is removed from the special socket, the oven will turn off
and “Off” appears on the dis-play.
Cooking over mode
Selecting cooking
temperature
Oven light control
Child safety lock
Cooking with probe
(only available on some
models)
INSTRUCTIONS FOR USE
– 5-button electronic programmer H3 (HYBRID OVEN)
Loading ...
Loading ...
Loading ...