Loading ...
Loading ...
Loading ...
INSTALLATION
EN 8
Before connecting the steamer
Warning
Ensure that your appliance has not suffered any damage during
transport (deformed seal or door, etc.). If you see any kind of
damage, before doing anything else, contact your retailer.
In order to easily locate the reference information for your appliance, we
recommend that you note this information on the “After-Sales Service
Department and Customer Relations” page.
Electrical connections
Ensure that:
• the electrical installation has suffi cient voltage;
• the electrical wires are in good condition;
• the diameter of the wires complies with the installation requirements;
• your electrical installation is equipped with 16-ampere thermal-
sensitive protection.
In case of doubt, consult your electrician-installer.
The electrical connections are made before the appliance is installed in
its housing.
The appliance must be installed correctly to ensure electrical safety.
During installation and maintenance operations, the appliance must be
unplugged from the electrical grid; fuses must be cut off or removed.
The oven must be connected with a power cable (standardised) with
three 1.5 mm² conductors (1 ph + 1 N + ground) that must be connected
to a monophase 220-240 V network via a CEI 60083 standardised
receptacle (1 ph +1 N + ground lead) or in accordance with installation
rules. The safety wire (green/yellow) is connected to the appliance’s
terminal and must be connected to the installation earth.
In the case of connections with an electric receptacle, it must remain
accessible after installation of the appliance.
The oven’s neutral conductor (blue wire) must be connected to the
network’s neutral conductor.
In the electrical connection, ensure there is a means available to the user
to ensure they are able to disconnect the appliance from the outlet, either
by pulling the plug from the outlet or by turning off a switch, in compliance
with installation rules.
If the power cable is damaged, it should be replaced by the manufacturer,
its after-sales service department or by a qualifi ed person to avoid
danger.
Warning
We cannot be held responsible for any accident resulting from a
non-existent, defective or incorrect earth lead.
Loading ...
Loading ...
Loading ...