Loading ...
Loading ...
Loading ...
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Anti Static - To reduce statics by clothing friction and spray steam at the later
period of drying cycle.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS, DELICATES
(Dry level of every cycle exceeds Normal) and TIME DRY cycle.
Rack Dry - Rack Dry is available in the TIME DRY cycle. Temperature will be
set to Extra Low only. (Refer to the "Rack Dry" section on page 24.)
Mixed Load Bell - The mixed load bell that notifies you when the average
dry level in a load is damp dry (80% dried). This lets you take garments that
you don't want fully dried or that dry quickly out of the dryer early while letting
others continue to dry.
You can select this function in all Sensor Dry cycles except WOOL, SANITIZE
and ACTIVE WEAR. The dry level selections are limited to Normal Dry, More
Dry, and Very Dry.
Wrinkle Prevent - Wrinkle Prevent provides approximately 180 minutes
of intermittent tumbling in unheated air at the end of the cycle to reduce
wrinkling. Press the Wrinkle Prevent button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle Prevent is
selected.
The load is dry, and can be removed at any time during the Wrinkle Prevent
cycle.
My Cycle - Choose your favorite cycle including cycle, temp, dry level option,
etc. (Refer to the "My cycle" section on page 25.)
Adjust Time - Time can be added or subtracted from the automatically set
times in the Manual Dry cycles (TIME DRY, QUICK DRY, or AIR FLUFF cycles)
and WRINKLE AWAY cycle.
To add or subtract time from the cycle, press the Adjust Time arrow pad up or
down until the desired time is displayed.
Small Load Care TM (Gas model Only) - To control the operation rate for
drying a small load in the Sensor Dry cycle.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESSand DELICATES
cycle.
It can't be selected/cancelled when the drying cycle is running.
In order to improve drying effect and control operation rate, the drum can be
paused during operation.
Eco Dry (Electric model Only) - This function is available in the NORMAL,
and TIME DRY cycles. When the Eco Dry function is activated, drying takes
longer but the power consumption is reduced by up to 20%.
(When the Eco Dry function is enabled, the drying time can be extended up to
3 times depending on the specified temperature and the amount of laundry to
be dried. When the product is shipped, the Eco Dry function is set to On by
default.)
Press to pause and restart programs.
Press once to turn your dryer on, Press again to turn it off. If you turn
your dryer on and do not touch any buttons for 10 minutes, the power
automatically turns off.
lf you insert laundry into your dryer while it is extremely tangled immediately after your washer has
finished a wash or spin cycle, it may degrade the drying efficiency or cause the door to open. We
recommend that you disentangle your laundry appropriately before inserting it.
Each indicator on the graphic display means:
Steam
Child Lock
Filter Check
Vent Sensor
Engl sh- 23
Loading ...
Loading ...
Loading ...