Loading ...
Loading ...
Loading ...
To make the fan oscillate, press the clutch knob located
on the top of the motor housing. To get the directional
airflow, pull the clutch knob up to its initial position.
2. Oscillation Control
To adjust the air flow upward or downward, push the
grilles lightly to the desired direction.
3. Tilt Adjustment
The height of the fan can be adjusted by loosening the
height adjustment ring, carefully carefully raising or
lowering the fan and firmly re-tightening the height adjustment ring.
4. Height Adjustment
Fig.1
OPERATING INSTRUCTION
“ ” MODE KEY
Press The M to select mode. The sequence is normal, natural ，sleep and ECO.
when this M being touched repeatedly or continuously，The light can indicate
mode state，It can also be controlled by remote control.
type changes in the sequence from NORMAL---NATURAL---SLEEP---ECO
---NORMAL wind when this key being touched repeatedly or kept in.
“ ” ON/OFF KEY
The key is for switching on the fan. The fan will be started.
Press the key again, it will be switched off.
“ ” TIMER KEY
“ ” SPEED KEY
1. Remote Controller (Fig.1)
When the TIMER key is touched repeatedly , the time to be set for
air delivery increased step by step .For instance, if the fan operation
is required to be set for 7hours, this key must be touched repeatedly
so that the pilot lamps for 1, 2and 4 hours lighten together.
It means that the set time is 1+ 2+ 4= 7hours. The time
setting indicated by the pilot lamp will decrease gradually by a unit of
1hour. Don’t press the TIMER key when the fan is required to operate
continuously. At the moment all pilot lamps don’t light.
5
When the fan runs at normal mode or ECO mode, press the “speed” repeatedly
to choose 5 different speeds ；When it runs under natural or sleep mode，press
the “speed” repeatedly to choose 3 different speed .
Loading ...
Loading ...
Loading ...