Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
ENVIRONMENTAL PROTECTION FIRST !
L Your appliance contains valuable materials which can be recovered or recycled.
 Leave it at a local civic waste collection point.
Problems Possible causes Solutions
There is no steam. The appliance has not
been turned on.
Check that the appliance has been
plugged in correctly. Next press the
On/O pedal, the power indicator
light located at the front of the
appliance will come on.
The hose has been
obstructed.
Check that the hose is not bent or
twisted.
There is no water left in
the water tank.
Unplug the appliance and ll the
water tank.
The steam is not ready yet. The appliance will produce steam
about 45 seconds after it has been
switched on.
The steam ow is
low.
Your steamer has a
build-up of scale because
it has not been rinsed out
regularly.
See descaling process (Descaling
procedure paragraph).
The hose has been
obstructed.
Check that the hose is not bent or
twisted. Always extend fully the pole.
There is no water left in
the water tank.
Unplug the appliance and ll the
water tank.
Water runs through
the holes of the
steam head.
There is condensation in
the hose.
Never use a steamer in the horizontal
position. Hold the hose vertically
outstretched and wait for the
condensed water to return to the
steamer. Always extend fully the pole.
The steamer takes
a long time to heat
and/or ejects white
particles.
Your steamer has a
build-up of scale
because it has not been
descaled
regularly.
See descaling process
(Descaling procedure paragraph).
6
Loading ...
Loading ...
Loading ...