Loading ...
Loading ...
Loading ...
• The appliance must be used and placed on a at, stable,
heat-resistant surface. When you place the appliance on
its stand, ensure that the surface on which the stand is
placed is stable.
• The appliance must not be used if it has been dropped, if
there are visible signs of damage or if it is leaking.
• Check the electrical power cord and steam cords for signs
of wear or damage prior to use. If the electrical power
cord or the steam cord is damaged, it must be replaced
by an Approved Service Centre to avoid any danger.
• Do not use other descaling products than the one cited
in the IFU.
• Do not obstruct the appliance airways.
Before rst use
• When you rst use the appliance, some smoke or a harmless odour may be produced or there may be
a small discharge of particles. This will not aect the use of the appliance and will disappear quickly.
What water to use?
• Your appliance has been designed to use untreated tap water.
Do not use pure demineralised or pure distilled water, water from clothes dryers, scented or softened
water, rain water, ltered, bottled or boiled water, water from refrigerators, batteries or air conditioners
as these may damage the appliance. These types of water contain organic waste, mineral elements
that become concentrated when heated and cause spitting, brown staining, leaking or premature
wear on your appliance. If your water is very hard, mix 50% untreated tap water with 50% distilled
water (available in hardware stores).
SAVE THESE
INSTRUCTIONS
5
Loading ...
Loading ...
Loading ...