Loading ...
Loading ...
/_, WARNING: BE SURE to readand understandallinstructions. Failure to
follow all instructionslisted below may result in electric shock,fire and/or
serious personal injury.
WORK AREA SAFETY
1.ALWAYS keep your work area clean and well lit. Clutteredbenchesand dark
areas inviteaccidents.
2. DO NOT operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Powertoolscreate sparks which
may ignitethe dustor fumes.
3. ALWAYS keep bystanders, children, and visitors away while operating a
power tool. Distractions can causeyou to lose control
ELECTRICAL SAFETY
1. Double Insulated tools are equipped with a polarized plug (one blade is
wider than the other.) This plug will fit In a polarized outlet only one way.
If the plug does not fit fully In the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not change
the plug In any way.
2. Doubleinsulation Deliminates the need for the three-wiregroundedpower cord
and groundedpowersupplysystem.ApplicableonlytoClass II (doubleinsulated)
tools.
3. Beforeplugginginthe tool, BE SURE that theoutletvoltagesuppliedis withinthe
voltagemarked on thetool'sdata plate,DO NOT use"AC only" rated toolswith a
DC powersupply.
4. ALWAYS avoid body contact with grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There isan increasedrisk ofelectricshock
if your body is grounded.
5. If operating the power tool in damp locations Is unavoidable, ALWAYS use a
Ground Fault Circuit Interrupter to supply power to your tool. ALWAYS wear
electrician's rubber gloves and footwear in damp conditions.
6. DO NOT expose power tools to rain or wet conditions. Water enteringa power
toolwillincreasethe risk of electricshock.
7, DO NOT abuse the cord, NEVER use the cord to carry the tools or pull the
plug from the outlet. Keep cord away from heat, o11,sharp edges or moving
parts. Replace damaged cords immediately, Damaged cordsincreasethe risk
of electricshock.
8. When operatinga powertooloutside,ALWAYS use an outdoorextensioncord
marked'_V-A"or '_N".These cordsare ratedfor outdooruseand reducethe risk
ofelectricshock.
NOTE: The extensioncord musthaveadequate wire size AWG (American Wire
Gauge) for safe, efficientuse. Smaller gaugewires, havegreatercapacity(16 gauge
wire has morecapacity than 18 gauge wire),
Loading ...
Loading ...
Loading ...