Loading ...
Loading ...
Loading ...
PROBLEM CAUSE SOLUTION
An unusually 1, Damagedteeth 1. Replaceblades
large amount 2. Cuttingspeedis tooslow 2, Increasecuttingspeed
of sparks 3, Bluntteeth 3. Replaceblades
A lot of wear 1. Cutting speed istoo fast I Reduce cuttingspeed
In sections 2. Damaged teeth 2, Replace blades
3. Bluntteeth 3, Replace blades
4. Not cuttingperpendicular 4. Holdsaw perpendicular
towork surface to worksurface
Blades are 1.Damaged teeth 1.Replace blades
breaking 2. Cutting speed istoo fast 2. Reducecuttingspeed
3. Bluntteeth 3. Replace blades
4. Blades have buckled 4. Replaceblades
5. Blades have burned out 5. Replaceblades
Possible causes
of broken teeth
1. Cuttingspeed istoo fast
2.The surfacebeing
cutistoo hard
3. Theteeth havebeen
damagedby impact
4. Bladeswerenot
installed properly
5. Bladesare burnedout
6. Notcuttingperpendicular
to worksurface
1. Reduce cutting speed
2. Replace blades
3, Replaceblades
4, Replacebladesand follow
the proper bladeinstallation
instructions
5. Replace blades
6, Replacebladesand ahvays
holdsaw perpendicularto
worksurfacewhencutting
IMPORTANT: ifa noticeablerise intemperatureoccursin the motorhousingand the
saw becomes uncomfortableto hold, turnthe saw off, and allowit tocool downto
roomtemperature and checkthe blade for wear beforeresumingyour cuttingproject.
Ifthis isnot done, permanent damage tothe sawwillresult.
Make sure thatthe material being cutis withinthe specificationofthe saw'scapacity.
Reviewthe cuttingspeed thatyou are applyingto the work piece.
Z_WARNING: ThisTwin Cutter saw uses specially designed 5-in. blades I
and no other types of blades should ever be used. Other blades will not operate
I
safely in this saw and could result in serious personal injury.
The following accessoriesfor your Twin Cuttersaw are available at your local
Sears store.
9-32566 -- A packaged set of 2 UniversalTwln Cutter Saw Blades
9-26678 -- 6 Packaged Wax Lubricating Sticks
/_ WARNING: The useof attachmentsor accessoriesthat are not
recommended might be dangerous.
21
I
Loading ...
Loading ...
Loading ...