Loading ...
Loading ...
Loading ...
5
bromic.com/heating
service technician if you are unsure if you have a circuit breaker
installed on the premises.
• Do not install the heater directly near a bathtub, shower or
swimming pool. Any switches or controls must not be within
reach of a person in the bathtub, shower or swimming pool.
• To maintain Ingress Protection Rating (IPX4), only IP44 rated
conduit fittings should be used for electrical installation.
• A means for disconnection of the heater must be
incorporated in the fixed wiring according to the local
electrical codes.
• If the supply cord is damaged, it must be replaced by an
authorised and licenced person in order to avoid a hazard.
• Do not bend the electrical connection to the power supply.
• Keep the cable away from sharp edges during handling and
installation.
• Do not pull on the cable or subject it to traction force.
• Avoid physical shock & impact to the heater when handling.
• Do not apply any pressure on the glass surface.
• Keep the electrical connection area to the power supply
clean.
• Ensure that the heating unit is not directly exposed to rain or
water contact.
• Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
• If any part of the instruction manual is missing or damaged,
contact Bromic for a complete version.
• If you are unsure of any aspect of the installation, contact
Bromic for advice.
The Platinum Smart-Heat™ Electric is designed to provide efficient spot heating for commercial and
residential applications.
The heaters are built with corrosion resistant materials, have electrical approval in North America and are
rated to IPX4 water Ingress Protection. Making the Platinum Smart-Heat™ Electric the perfect solution for a
variety of indoor and outdoor heating applications.
PRODUCT OVERVIEW
IMPORTANT NOTES AND WARNINGS
CONTINUED ...
PRODUCT FEATURES
▪ Ultra-thin and stylish design
▪ Efficient directional spot heating
▪ Heat Zones — one or more heaters can be switched
on and off simultaneously from a single remote-
located switch
▪ Platinum Smart-Heat™ Electric Heaters can also be
integrated into smart control systems
▪ Wind resistant & IPX4 water protection rating
▪ Suitable for outdoor and indoor heating applications
such as restaurants, cafes, bars and clubs, factories,
office spaces, designated smoking areas, public
areas, hotels and more
▪ Standard Mounting - included with heater
▪ Optional Mounting - purchased separately from
heater:
▪ Ceiling Recess
▪ Tube Suspension
SPECIFICATIONS
Model
Platinum Smart-Heat™ Electric II
Part no.
BH0320003
BH0320005
BH0320007 BH0320008
Heat Output (Watts) 2300W 3400W
Power connection required (Volts/Amps)
220-240V - A.C.
- 50/60Hz - 9.6A
220-240V - A.C. -
50/60Hz - 14.2A
Dimensions (WxHxDmm)
840 x 182 x 54 mm
(33.0 x 7.0 x 2.0”)
1275 x 182 x 54 mm
(50.2 x 7.0 x 2.0”)
Weight (kg) 7.5kg (16.5lbs) 10kg (22lbs)
Finish Brushed Stainless Steel 304
Approval
Intertek: 5001799
Black
White
Loading ...
Loading ...
Loading ...