Loading ...
Loading ...
Loading ...
Installation
EXHAUST HOSE INSTALLATION
1. Rotating the exhaust hose according to the direction in Fig (1) will remove the
hose from the unit.
2. Rotating the exhaust hose according to the direction in Fig (2) will attach the
hose to the unit.
3. Extend the exhaust hose to a length of no more than 400mm. The exhaust hose
must be kept parallel and must not be bent up or down.
NOTE: This unit has a self evaporative system which removes excess condensation
by means of evaporating water collected in the tank. Therefore saving you the hassle
of having to use a drip tray or drainage hose. Please make sure the rubber cap is
locked into position to avoid any leakage.
NOTE: In high humidity areas, there may be excess water condensation produced
that cannot be removed or evaporated. In this instance, the unit will need to be
drained. View the WATER DRAINAGE section for details. The unit will automatically
switch OFF when the internal water tank is full.
9
Loading ...
Loading ...
Loading ...