Loading ...
Loading ...
Loading ...
Functions
POWER
Press the POWER button to turn the unit ON or OFF.
FUNCTION
Press the FUNCTION button to select between COOL, or DRY modes.
COOLING MODE
1. The exhaust hose needs to be installed for this mode and the rubber cap should
be tted to the drainage hole.
2. To set this mode, press the FUNC button until the COOL indicator light
illuminates on the control panel.
3. Set the target temperature between 17-30°C by pressing the increase (+) or
decrease (-) buttons until the desired temperature is displayed on the LED
display.
TIP: The most suitable temperature setting for a room during summer is 24°C.
DEHUMIDIFICATION MODE
1.
2. To set this mode, press the FUNCTION button until the DEHUM indicator light
illuminates on the control panel.
3. The fan speed is selected automatically by the unit and cannot be changed.
NOTE: Keep windows and doors closed for the best dehumidifying eect.
TEMP+ / TEMP-
Press the TEMP+ button to increase the set temperature or press the TEMP- button
to decrease the set temperature. The temperature can be set between 17-30°C.
NOTE: The time taken to reach the set temperature will depend on the environment
and the size of the space in which the unit is operating in. For example, if the
ambient temperature is too hot or the room is too large, the rate at which the
temperature descends will be slow as the cooling may be less eective.
FAN SPEED
1. The exhaust hose needs to be removed for this mode.
2. Press the SPEED button to select either LOW, MEDIUM, HIGH or AUTO fan
speeds.
3. If AUTO fan speed is selected (during cooling mode) then either HIGH, MEDIUM
or LOW speed will be selected automatically according to the dierence between
set temperature and ambient room temperature.
11
The exhaust hose needs to be connected. Remove the rubber cap from the
drainage hole to connect the drain hose (not supplied).
Loading ...
Loading ...
Loading ...