Loading ...
Loading ...
Loading ...
ABOUtyourw terfIlTER...
WATERfIlTERINSTALLATION
ANDREMOVAl
INSTALLING
WATER FILTER
1. Removebluebypasscap andretain
for possiblelateruse.
2. Remove sealing label from end of
filter and insert intofilter head.
3. Rotate gently clockwise until filter
stops,and snap filter cover closed.
4. Reduce waterspurts by flushing air
from system. Run watercontinuously
for 2 minutes through dispenser until
waterruns steady.
Additional flushing may be
required in some households
where water is of poor quality.
REPLACING
WATER FILTER
IMPORTANT: Airtrappedin system
maycausewater and cartridgeto eject.
Use cautionwhenremoving.
1. Turn filter counterclockwise until it
releases from filter head.
.
.
Drain water from filter into sink, and
dispose in normal household
garbage.
Wipe up excess water in filter cover
and continue with Installing Water
Filter, steps 2 and3.
WHEN DO I CHANGE THE
WATER FILTER?
The dispenserfeatures a water filter
change indicator. For instructions on
how to operate and reset this feature,
refer to the Dispenser Features section
(page 18).
IMPORTANT: Condition of water and
amountused determines life span of
water filter cartridge. If water use is
high, or if water is of poor quality,
replacement may need to take place
more often.
HOW DO I ORDER A
REPLACEMENT FILTER
CARTRIDGE?
Kenmore®replacement water filter
cartridge model 9005 is available
through Sears dealers and servicers.
You may also order through Sears by
using the information on the back cover.
I'M TRYING TO DISPENSE
WATER TO FLUSH THE
SYSTEM. WHERE'S THE
WATER?
During initial use, allow about a 1 to 2
minute delay in water dispersal to allow
internal water tank to fill.
WHAT IF I CHOOSE NOT
TO USE THE WATER
FILTRATION SYSTEM?
Dispenser feature may be used without
water filter cartridge. If you choose this
option, replace filter with blue bypass
cap.
II'1
m
13
Loading ...
Loading ...
Loading ...