Loading ...
Loading ...
Loading ...
15
47" Computer Desk with Drawer
www.insigniaproducts.com
STEP 9: Assemble the desk frame
You n eed :
Use the hex wrench (S) and M6 × 15 mm screws (Q) to:
1 Connect the front support bar (10) from the right leg frame (4) to the left leg frame (3). Make sure that the holes in
the front support bar face toward the bottom of your desk (as shown).
2 Connect the bottom support bar (11) from the right leg frame to the left leg frame. Make sure that the holes in the
bottom support bar face toward the back of your desk (as shown).
3 Connect the upper back support bar (18) from the right leg frame to the left leg frame. This is the desk frame.
Note: To make assembly easier, do not lock the screws tightly until you have assembled all other parts.
Q
M6 × 15 mm screws (12)
S
Hex wrench
3
Left leg frame
4
Right leg frame
10
Front support bar
11
Bottom support bar
18
Upper back support bar
Add direction/orientation to these graphics.
(e.g. Front/Top, Back/Top, Back/Bottom, etc.)
FRONT/TOP
BACK/BOTTOM
Loading ...
Loading ...
Loading ...