Loading ...
Loading ...
Loading ...
Installation
Important: For electrical connection
carefully follow the instructions given in
specific paragraphs.
The class of your appliance is shown on
its rating plate.
Do not put hot pot on the plastic parts of
the appliance.
Do not store flammable gas and liquid in
the appliance, because they may
explode.
Do not place wine directly against the
rear wall of compartment.
The appliance’s manufacturer’s storage
recommendations should be strictly
adhered to. Refer to relevant instructions.
The inner lining of the appliance has
channels through which the refrigerant
passes. Should the channels be
punctured the unit would be damaged
beyond repair. DO NOT USE SHARP
INSTRUMENTS to scrape of frost or ice.
Frost may be removed by using a scraper.
Under no circumstances should be solid
ice be forced off the liner. Solid ice should
be allowed to thaw when defrosting the
appliance.
Unpack the appliance and check if
there are damages on it. Do not connect
the appliance if it is damaged. Report
possible damages immediately to the
place you bought it. In that case retain
packing.
During normal operation, the compressor
and/or condenser at the back of the
appliance heat up considerably. For
safety reasons, minimum ventilation must
be as shown in the instructions.
Attention: keep ventilation openings
clear of obstruction.
Care must be taken to ensure that
the appliance does not stand on the
electrical supply cable.
Important: if the supply cord is
damaged, it must be replaced by a
special cord or assembly available from
the manufacture or its service agent.
If the appliance is transported
horizontally, it is possible that the oil
contained in the compressor flows in the
refrigerant circuit. It is advisable to wait
at least two hours before connecting the
appliance to allow the oil to flow back in
the compressor.
There are working parts in this product
which heat up. Always ensure that there
is adequate ventilation as a failure to
do this will result in component failure
and possible loss. See installation
instructions.
The wine cabinet is designed to be
used specifically for the storage of
potable wine only.
Best performance is obtained with
ambient temperature as follows:
Use
For an ambient
temperature
Climate
classification
Relative
humidity
27 70
7
Loading ...
Loading ...
Loading ...