Loading ...
Loading ...
Loading ...
9
REVERSE THE DOOR SWING
FOR BUITL-UNDER SERIES
Remarks:
The instruction is based on a unit with right door hinge installed already.
To reserve the door from right hinge to left hinge, you need to get ready 2 new spare parts: an
upper left hinge, and a bottom left hinge.
All removed parts must be saved to do the door reinstallation, except those remarked with
“Disused”.
1
st
step –Open the door, and loosen the 2 screws. See Figure 1.
2
nd
step – Carefully remove the door from the upper right hinge and prevent it from
scratching. Take out the support rod from the door hinge hole. See Figure 2.
3
rd
step – Pull out the 6 decorating plastic bolts covering the reserved hinge screw holes at the front
left corner of the cabinet.
4
th
step – Unscrew the upper right hinge
○
4 (Disused) and bottom left hinge
○
6 (Disused) from
the cabinet. See Figure 3.
Install the upper left hinge
○
7 and bottom left hinge
○
8 to the left side of the cabinet.
Make sure the screws are tightened. See Figure 4.
5
th
step – Put upside down the door and install it to the left hinges by following the opposite
steps of taking down of the door as described above.
6
th
step – Cover the hinge screw holes on the right side with the 6 decorating plastic bolts.
WARRANTY: Call Bar Fridges Australia on
1300 170640 8:30>7pm Mon-Fri, 9>12 Sat.
Or simply logon to the website, at warranty link on top
menu page.
You must have proof of purchase document.
www.bar-fridges-australia.com.au