Loading ...
Loading ...
Loading ...
18
INSTALL ANTI-TIP BRACKET
Measure the height from floor to the
front overhang and mark on rear wall.
4
If required, install a spacer at the rear of
the cavity to bring depth to 24” (610mm).
3
7
Ensure that the anti-tip bracket is
installed correctly to prevent the
possibility of the appliance tipping
forward when the door is opened.
Check for wall stud.
1
For solid wall installs:
Using the bracket as a guide, pre-
drill four holes into the wall or spacer.
Secure bracket using crosshead screws.
5
Install kit A
Measure the depth range of the alcove
ensuring the minimum depth range has
been met.
2
6
For masonry wall installs:
Using the bracket as a guide, pre-drill
four holes into the wall. Hammer four
masonry plugs into the wall until flush
before securing the bracket using
crosshead screws.
Install kit A
Loading ...
Loading ...
Loading ...