Loading ...
Loading ...
Loading ...
11
11
10
10. Tip: Avoid pinching the wires. Attach the
Upright (4) to the Frame (1) with four M8 x 20mm
Screws (93) and four M8 x 12mm x 1mm
Washers (92); start all the Screws, and then
tighten them.
Avoid pinching
the wires
1
93
92
92
93
4
20
19
78
78
78
78
78
73
22
4
21
11. Attach the Front Shield Cap (19) to the Upright
(4) with two M5 x 12mm Screws (78); start both
Screws, and then tighten them.
Tip: Avoid pinching the wires. Press the Front
Shield Cover (20) onto the Left and Right Front
Shields (21, 22); make sure that the forks on
the underside of the Front Shield Cover are
inserted into the indicated slots (E) on the
exercise bike.
Next, remove the Screw Cap (73) from the Front
Shield Cover (20).
Attach the Front Shield Cover (20) with three
M5 x 12mm Screws (78); start all the Screws,
and then tighten them.
Then, press the Screw Cap (73) back into the
Front Shield Cover (20).
E
Loading ...
Loading ...
Loading ...