Loading ...
Loading ...
Loading ...
The assembled cleaner will look like lib
this drawing.
Assemble handle
m "
Attach upper handle
Remove clean solution tank (upper tank)
from deep cleaner.
A
I
With cx_rd hook (A) to back of deep cleaner,
push upper handle down onto lower had _
die, Push bolts intoholes on front of han-
dle. If bolts will not go through hole easi-
ly handle is not pushed completely
down.
Place nuts in recessed areas on back of
handle. Hold each nut in place while
tightening each bolt securely with a
Phillips screw driver,
Only two nuts are needed on this model,
The extra nLlt is not required but has
been provided for your convenience,
When handle sections are corrlpletely
together, squeeze trigger (B) on upper
handle to snap trigger rod In place.
Replace clean solution tank (upper
tank) by positioning bottom first. Press
on tank handle to snap top of tank into
place.
Press cord into cord clip on back of
handle. Pull cord tight.
Attach hose clip
Push tab on side of clip into hole on
side of handle,
Pivot clip ;_rld push other tab into hole
at b_ck of hell'Idle to lock into place.
4
Loading ...
Loading ...
Loading ...