Loading ...
Loading ...
Loading ...
SANTOS: Operating and servicing manual
98142 EN 2.0 - 12 2013 9/ 19 www.santos.fr
IMPORTANT: It is prohibited to use spare parts other than those certified
made by SANTOS
For all spare part orders (see references in the exploded view at the end of the manual),
state:
the type,
the machine serial number and
the electrical specifications ()
recorded under the machine.
REPLACING GRINDING DISCS
IMPORTANT: always replace the 2 grinding discs (19 and 21) at the same time.
(Use SANTOS grinding discs ref 00001B).
The 2 grinding discs are identical and can be fitted equally either on the moving plate
(19) (moving grinding disc) or on the adjuster cast iron unit (20) (fixed grinding disc).
1. Stop the machine by putting the switch (12) on "0" and unplug the power supply
cord.
2. Remove the front top plate (16) not holding the push button, empty the coffee-bean
container, remove the fixing rod from the coffee-bean container (4).
3. Remove the coffee-bean container (2) with the cover (1) and coffee inlet nozzle (3).
4. Turn the grinding disc gap adjuster button (6) clockwise as far as it will go to the
"COARSE" setting.
5. Remove nuts (7) and dismantle the grinding unit (5), to have access to the grinding
discs.
6. Change the grinding wheels (3 fastening screws) after carefully cleaning the
supporting surfaces.
TAKE CARE: The slightest small coffee particle under the grinding wheel may
prevent the machine from operating correctly. It is recommended that the grinder
body is cleaned with a compressed air jet or a dry brush.
7. Reassemble the grinding unit (5) and adjust the grinding gap to its minimum setting.
TAKE CARE
• Before tightening the fastening nuts (7) on the grinding unit (5), check that the dial
(24) of the grinding wheel adjuster button (6) is set to “COARSE”"
This precaution is essential to prevent any risk of the grinding wheels being brought
too close to each other, which could cause damage to the grinding unit.
!
!
!
Loading ...
Loading ...
Loading ...