Loading ...
Loading ...
Loading ...
SANTOS: Operating and servicing manual
98142 EN 2.0 - 12 2013 8/ 19 www.santos.fr
ADJUSTING THE GRIND
• Turn the grinding disc gap adjuster button (6) clockwise for a coarser grind and
anticlockwise for a finer grind. The factory setting is for the finest grind with the
grinding discs nearly touching each other.
ADJUSTING THE DRAWER HOLDER SLIDERS
• Unscrew the 4 adjustment screws (22).
• Center the drawer (13) in the 2 sliders (23).
• Remove the drawer (13).
• Tighten the 4 adjustment screws (22).
• For grinders with a brew basket, proceed in the same way but replace the grind
drawer (13) with the brew basket of your coffee maker.
ADJUSTING THE REQUIRED MEASURE OF COFFEE
The quantity of ground coffee dispensed can be adjusted via an adjuster button of the
timer (14), inside the frame of the coffee grinder. This button adjusts the operating time of
the machine.
• To adjust the quantity of ground coffee to be dispensed:
o unplug the appliance
o take down the rear lower plate to access the adjuster button (14)
o perform dispensing tests to obtain the desired quantity of ground coffee.
SERVICING
• Clean the coffee outlet, the coffee-bean container and the inlet of the grinder body
from time to time. Always turn the appliance off by putting switch (12) in position "0"
and unplug it.
MAINTENANCE
Before carrying out any work on the appliance, it must in all cases be unplugged from the
mains power supply and the motor start capacitor discharged:
Discharging the capacitor:
Use a screwdriver with insulated handle to touch the 2 connectors on the capacitor
(13). The appearance of an electric arc shows that the capacitor has discharged.
Spare parts:
This machine requires no specific maintenance. The bearings are lubricated for life.
If work is required to replace worn parts such as the grindstones or the electric or other
components, refer to the parts list (see exploded view at the end of the manual).
Loading ...
Loading ...
Loading ...