Loading ...
Loading ...
Loading ...
8
DOOR REMOVAL AND REVERSAL INSTRUCTIONS
NOTE: The direction in which your refrigerator doors open (door swing)
can be reversed, from left to right or right to left, by moving the door
hinges from one side to the other. Reversing the door swing, should be
performed, by a qualified person.
1. Remove top hinge cover
2. Remove top hinge with Phillips screwdriver and lift freezer door o
of center hinge and set door aside.
3. Unscrew center hinge with Phillips screwdriver
4. Lift refrigerator door o of bottom hinge and set aside.
5. Remove bottom hinge with Phillips screwdriver.
6. Now remove all plugs and caps from opposite side and place them
in the holes you just remove the screws from.
7. Using a Phillips screwdriver fasten the bottom hinge in place using
the screws you previously removed.
8. Place fridge door on bottom hinge, then place middle hinge in top
hole of fridge door and using the Phillips screwdriver, fasten the
middle hinge in place using the screws you previously removed.
9. Now place the freezer door on top of the middle hinge, then
place top hinge in top hole of freezer door and using the Phillips
screwdriver, fasten the top hinge in place using the screws you
previously removed.
10. Tighten all screws while making adjustments where necessary
to ensure they are aligned correctly and closing well against the
cabinet, this will reduce any excessive frost build up
NOTE: Once the doors are reversed and if the gasket does not meet
the cabinet on the hinged side, using a hair dryer or heat gun heat
the gasket while on the appliance. The gasket will expand to meet
the cabinet. Allow 30 minutes to cool before opening
IMPORTANT: After transit where the fridge has been
on its side or back, ensure that the fridge is in a level,
upright position for 12 hours to allow compressor fluids to
redistribute evenly before use.
INSTALLATION continued
Loading ...
Loading ...
Loading ...