Loading ...
Loading ...
Loading ...
REMOVING COLLECTED WATER
1. Emptying the Bucket:
a. When the bucket if full the unit will shut down and the "Water Full" indicator will illuminate.
b. Remove and empty the bucket as shown with the photographs below.
c. When replacing bucket, it must be located correctly for the unit to turn back on automatically.
.
Continuous Drainage:
a. Remove the cap from the rear of the dehumidifier and insert into the
collection tray inside the front of the unit above the bucket. (See photo).
b. Screw the hose attachment supplied into a suitable length garden hose
(not supplied).
c. Press the 8" long plastic tube supplied, firmly onto the back of the hose
adaptor.
d. Locate the opposite end of the plastic tube onto the rear spigot of the
dehumidifier and press firmly into place.
e. Position the open end of the garden hose into a suitable drain. Make
sure the hose is level and has no kinks in it.
CARE & CLEANING
1. Filter
a.
b.
C.
d.
Remove the filter every two weeks based on normal operating conditions.
To remove the filter first remove the bucket and reach under front to
remove filter as shown.
Wash the filter with clean water then dry.
Re-install the filter and replace the bucket.
2. Cabinet:
a. Dust cabinet with oil-free cloth, or clean using a damp cloth.
b. Vacuum grill using brush attachment.
3. Water Bucket:
a. Clean bucket using warm water and detergent.
Loading ...