Robinhood RLES61SS-WH 60cm Slideout Rangehood

User Manual - Page 8

For RLES61SS-WH.

PDF File Manual, 10 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
8
Operating instructions
Light
The light can be operated independently from the fan and is controlled in accordance with the graphics printed on
the control panel.
Fan
The fan can be run at different speeds depending on the cooking requirements and is controlled in accordance
with the graphics printed on the control panel.
Cleaning and maintenance
General Maintenance
Switch off the rangehood before cleaning or maintenance. To prevent surface damage never use abrasive
or oil based liquid cleaners. To clean the surfaces of the appliance, use mild detergent and warm water. In
areas of high humidity and coastal environments cleaning should be carried out frequently.
Warning: a build up of oil may occur if the compact canopy is not cleaned regularly.
Filter Maintenance
To maintain efficiency, the filters should be removed regularly (approximately monthly), and washed using hot
soapy water or the dishwasher. Note - some discolouration of the frame may occur if washed in the
dishwasher.
Rangehoods fitted with charcoal filters are designed to remove grease and odours from cooking vapours prior to
the cleansed air re-entering the kitchen (when the rangehood is in recirculation mode). Charcoal filters should be
replaced every two to four months depending on use.
Note: Fully saturated charcoal filters can become a barrier to air movement therefore limiting rangehood
performance. In the event of fire, grease laden filters could be flammable and therefore regular replacement is
recommended. In ducted installations, conventional aluminium filters are recommended.
Replacement of Halogen Lamps
Before changing the lamp ensure the power supply has been disconnected to the rangehood and
allow the lamp too cool down in temperature before attempting to remove.
To replace a lamp, first disconnect the rangehood from the power supply. Apply finger pressure to the face of the
lamp and twist one quarter turn anti-clockwise, the lamp will now be free to drop out. Insert the replacement
lamp into the lamp holder, apply finger pressure and twist one quarter turn clockwise.
Lamp Replacement
Tungsten halogen lamp: GU10+C
Maximum wattage: 50 W
Voltage: 240 V
Lamp Dimension: Nominal diameter 51 mm
For NZ phone (09) 415 6000 or www.robinhood.co.nz. For AUS phone 1800 648 556 or
www.robinhood.com.au.
Loading ...
Loading ...