Loading ...
Loading ...
Loading ...
5
Pre-Installation - preparing the rangehood for installation
Ducted rangehood
If the rangehood is to be installed as a ducted hood, remove the appropriate duct knockout A.
Changing the handle
1. Using a Screwdriver, unscrew the 3 screw on the back of the Handle.
2. Select the desired handle option from those available, and reattach the new handle using the same screws
Recirculating Rangehood (for RO61SS/WH/80 only)
If the Rangehood is to be installed as a recirculating hood, first ensure the overhead cabinets are built according
to the diagram below, and
1. Remove the Cover Tape B.
2. If an 80mm handle is not installed. Remove the Front Fascia C by undoing the 3 screws on the fascia.
3. Replace C with the Replacement Front Panel D constructed of the same or similar material as the cupboard
doors. See the diagram below for the height of panel.
NOTE; RO91SS/WH can be recirculated by fitting a custom made 80mm front fascia. 80mm fascia is not supplied
or available for RO91SS/WH. Charcoal Filter part #14961 can be purchased as an accessory.
Cooking fumes
Filtered air
Loading ...
Loading ...
Loading ...