Loading ...
Loading ...
Loading ...
VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 43
Scheduling Alerts
The Schedule Alerting tab enables you to specify the days and times of
the week when you want to receive alerts and during that time,
automatically record any motion in the viewing area. An alert would be
triggered based on detected motion. At times when you do not expect
there to be movement around your home or office, you may wish to
schedule an alert.
For example, a store might set up a camera just inside the entrance. It is
likely that the store would expect customers to be entering and exiting
during the day but once the store closed in the evening and the owners
left, there should be no movement. By enabling the Schedule Alerting
feature, an alert would be triggered during the evening and night hours
when the store is closed.
For each schedule, you can set a beginning time and an ending time, and
specify the days of the week, the app should generate an alert if motion is
detected. The system uses a 24-hour clock, in sequential order up to
23:59. This means, that if you want to record from midnight to 5:00 AM,
for example, you would enter 00:01 as the start time and 05:00 as the end
time. If you want to record from noon to 5:00 PM, you would enter 12:00
to 17:00. However, if you wish to record from 20:00 to 3:00 (8:00 PM to
3:00 AM), you will need to specify two schedules:
From 20:00 to 23:59
From 00:01 to 3:00
Note that it is possible to specify in increments of one minute, such that
you can also record from 13:15 to 18:43. Once you have configured all of
your schedules, click Apply.
Note: To ensure that the recordings are made at the correct time, it is
important to verify that the time on the camera is set properly.
Loading ...
Loading ...
Loading ...