Summit EQFR71 8 Cu.Ft. Chest Refrigerator

User Manual - Page 11

For EQFR71.

PDF File Manual, 16 pages, Read Online | Download pdf file

EQFR71 photo
Loading ...
Loading ...
Loading ...
11
OPERATING SPECIFIC MODELS
NOTE: Models with BI in the model number, or VT65/VLT650 models, are designed for built-in
operation and need only minimal clearance on the sides and above the units. All other
models require 4 inches of airflow on the sides and above the units. All models operate best
when 2 inches is provided between the rear wall and the back of the unit.
EQFR Refrigerator Series / EQFF Freezer Series
These models are chest freezers or chest refrigerators, all completely frost-free with forced air
cooling. No defrosting is normally needed. For best operation, allow free airflow within the interior
(do not overfill). The thermostat is located on the bottom rear on the right side of the unit. Large
sizes may have lid-activated lights. The lights will generate some heat, so be careful to close lids
securely to deactivate.
VT, VLT Low-Temperature Freezer Models
These models are all manual defrost, upright or chest type freezers. Keep door closed for best
operation. The thermostats for these models are always digital, so follow directions on Page 8.
CAUTION: VERY LOW TEMPERATURE FREEZERS CAN DAMAGE UNPROTECTED SKIN, SO
ALWAYS WEAR GLOVES WHEN OPENING FREEZERS, AND NEVER DISCARD THE
WARNING LABELS ON THE FRONT OF THE FREEZER.
These freezers will operate best when adequate airflow is provided on the top, sides and rear of the
unit. The compressor on some models is fan-cooled, so be sure not to block the air vents on the
compressor housing. The refrigerant in low temperature freezers is different from that used in
household appliances, so never have unqualified technicians attempt to repair these units. These
units will operate best under some load, so try to avoid operating empty or nearly empty. If needed,
fill with ice-packs to at least 25% of the volume of the freezer.
Fixed Shelf
In some units, the center shelf is fixed in place and cannot be removed. This is because the glycol-
filled bottle that contains the temperature sensors for your alarm and thermometer is best stored in
this location. The center of your refrigerator or freezer will provide the most accurate temperature
readings. For proper temperature monitoring, keep the bottles in place and do not remove this shelf.
Loading ...
Loading ...
Loading ...