Loading ...
Loading ...
Loading ...
SETTING THE CONTROLS
Temperature
• Your refrigerator has a control pad inside the refrigerator
compartment that lets you regulate the temperature in
the freezer and refrigerator compartments.
• Initially set the refrigerator control at 37°F (3°C) and the
freezer control at 0°F (-18°C). Leave it at these settings
for 24 hours (one day) to stabilize. Then adjust the
compartment temperature as desired.
• Refrigerator Temp Control: 33°F to 46°F (0°C to 8°C)
The lower the number setting, the colder the refrigerator
compartment will become.
• Freezer Temp Control: -6°F to 8°F (-21°C to -13°C)
When the setting is at a lower number, the freezer
compartment becomes colder. The refrigerator
compartment becomes warmer because less cold air
flows into the refrigerator.
Ultralce
• When you press the Ultralce button, the graphic [ _ ]
will light up in the display and it continues for 24hours.
It will automatically shut off after 24hours have passed.
Or you can stop this function manually by pressing the
button one more time.
• This function increases both icemaking and freezing
capabilities.
Filter Reset
• When the Filter Reset indicator light turns on, you have
to change the water filter. Press the Filter Reset button
for 3 seconds to turn the indicator light off. You need to
change the water filter approximately every 6 months.
Alarm
• When the power is connected to the refrigerator,
door alarm is initially set ON and door alarm display will
show _ (ON).
Alarm
• When either refrigerator or the freezer door is left open
for more than 60 seconds, the alarm will ding to let you
know the door is open.
• When you close the door, the door alarm will stop
dinging.
f.%
• If you want to disable the door alarm function, press
button then the door alarm display will switched to
(OFF). Al_,_
ENSURING PROPER AIR CIRCULATION
Do not block air channels with any objects or food for air circulation to prevent food loss due to the lack of cooling air.
AIRFLOW
In order to ensure proper temperatures, air must flow between the refrigerator
and freezer sections.
Arrow in figure indicates air vent locations and direction of airflow.
Do not block any of the cool air vents with food packages. If the vents are
blocked, airflow will be interrupted and temperature and moisture problems
may occur.
If you add a large amount of food, the refrigerator will take longer to cool it.
At initial start-up allow your refrigerator to run for 2 or 3 hours before placing
food in it.
16
I
Loading ...
Loading ...
Loading ...