Loading ...
Loading ...
Loading ...
- 8 -
7. INSTRUCTIONS FOR USE
7.1 TO RAISE – STEPS 1 – 2:
With narrow end of jack handle , close
release valve tightly by turning it clockwise.
Place jack under vehicle at proper lifting
location. (Refer to vehicle Owner's Manual). If
fitted, turn the extension screw on jack
counterclockwise until it comes into contact
with vehicle.
Insert jack handle into handle socket ,
pump the handle to lift vehicle to desired
height.
7.2 TO LOWER
CAUTION: Lower vehicle slowly! Turn release
valve slowly.
Ensure there are no obstructions, tools or
persons below the vehicle BEFORE lowering.
Remove handle, use small end to open release
valve. (To open release valve, turn it SLOWLY in
a counter clockwise direction.)
NOTE: Do not open release valve more than one
(1) full turn.
When vehicle is fully lowered, remove jack.
(If Extension Screw has been extended, turn it
clockwise until it retracts enough to move jack
away from vehicle). Once removed from under
vehicle fully retract the jack and the extension
screw.
1
2
Loading ...
Loading ...
Loading ...