Loading ...
Loading ...
Loading ...
(110
\ 29 "_
_(73.66 cm)
3. Wide Opening Side-Swing Door
(110cln)
133/4"
27_/16"
(69.05 c
4. Wide Opening Hamper Door
*Most installations require a minimum 5
in. (14 cm) clearance behind the dryer
for the exhaust vent with elbow. See
"Venting Requirements."
Minimum installation spacing for
recessed area or closet installation
The dimensions shown following are for
the minimum spacing allowed.
• Additional spacing should be
considered for ease of installation and
servicing.
• Additional clearances might be
required for wall, door and floor
moldings.
• Additional spacing of 1 in. (2.5 cm) on
all sides of the dryer is recommended
to reduce noise transfer.
• For closet installation with a door,
minimum ventilation openings in the
top and bottom of the door are
required. Louvered doors with
equivalent ventilation openings are
acceptable.
• Companion appliance spacing should
also be considered.
(_.7_m)
1"
m
-
29' 1" 1" 27_6" 51_2"
_,5i_11 (2,5t_) (6905 cm)(l 4 cm)
1 2
('t.e_)
48'2
(310='al) -
B
24"2
i
3<'
1"/.6_)
3
1. RecessedArea
2. Side view - closet or confined area
3. Closet door with vents
Mobile Home-Additional Installation
Requirements
This dryer is suitable for mobile home
installations. The installation must con-
form to the Manufactured Home
Construction and Safety Standard, Title
24 CFR, Part 3280 (formerly the Federal
Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280).
Mobile home installations require:
• Metal exhaust system hardware which
is available for purchase from your
local Sears store or Sears Service
Center.
• Mobile home Installation Kit Part
Number 346764, see "Tools and Parts"
section for ordering information.
• Special provisions must be made in
mobile homes to introduce outside air
into the dryer. The opening (such as a
nearby window) should be at least
twice as large as the dryer exhaust
opening.
Loading ...
Loading ...
Loading ...