GE - General Electric DPSF505EW2WW GE electric dryer

User Manual - Page 13

For DPSF505EW2WW.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Before you call for service...
Troubleshooting 77ps
Save time and money! Review the charts on the following
pages first and you may not need to carl for service.
Dryerdoesn'tstart
Possible Causes
Dryer is unplugged
What ToDo
* Make sure the (hyer plug is pushed completely into
the outlet.
Fuse is blown/circuit breaker is * Check the house filse/circuit breaker box and
tripped replace fllse or reset breaker. NOTE:Most electric
(hTers use two filses/breakers.
Dryer doesn't heat Fuse is blown/circuit breaker is * Check the house filse/circuit breaker box and
tripped, the dryer may tumble replace fllse or reset breaker.
but not heat
Gas service is off * Make sure gas shutoffat (hyer and main shutoffare
flflly open.
Dryershakes ormakes Some shaking/noise is normal * Move (hyer to an even floor space, or adjust
noise Dryer may be sitting unevenly leveling legs as necess_uy until even.
Greasy spots on clothes Improper use of fabric softener * Follow directions on fabric softener paclc_ge.
Drying dirty items with clean ones * Use your (hTer to (hy only clean items. DirV items can
stain clean items and tt_e (hyer.
Clothes were not completely clean * Sometimes stains w|fich cannot be seen when tt_e
clothes are wet appear _6_er(hying. Use proper
washing procedures befbre (hying.
Lint on clothes Lint filter is full * Clean lint screen befbre each load.
Improper sorting * Sort lint producers (like chenille) fl'om lint collectors
(like corduroy).
Static electricity can attract lint * See suggestions in tiffs section under StATiC.
Overloading * Separate large loads into smaller ones.
Paper, tissue, etc., left in pockets * Empty all pockets before laundering clothes.
Static occurs Overdrying * TIy a fabric softener.
* Adjust controls for less d@ng.
No fabric softener was used * T U a fitbric softener.
Synthetics, permanent press and * T U a [hbric softener.
blends can cause static
Inconsistent drying times Type of heat * Automatic (hying times will wuy according to the t?qoe
of heat used (elecu'ic, natural or LP gas), size of load,
bqoes of fabrics, wemess of clothes and condition of
exhaust ducts.
/2
Loading ...
Loading ...
Loading ...