Kenmore 11060232002 commercial dryer

User Manual - Page 7

For 11060232002.

PDF File Manual, 20 pages, Download pdf file

Loading ...
Loading ...
Loading ...
LocalcodesmaypermittheuseofaU.L.-listed,
120/240-voltminimum,30ampere,dryerpowersupply
cordkit(pigtail).PowersupplycordshouldbetypeSRD
orSRDTandbeatleastfourfeetlong.Thewiresthat
connecttothedryermustendwithringterminalsor
spadeterminalswithturnedends.
Four-Wire Power Supply Cord
(Mobile home or other four-wire installations)
For mobile homes or other four-wire installations, the
power supply cord must have four, No.-10 copper wires
and match a four-wire receptacle of NEMA Type 14-30R.
The fourth wire (grounding conductor) must be identified
with a green cover or bare copper wire and the neutral
conductor by a white cover.
NEUTRAL NEUTRAL
_", U.L.-li_ed, (whi_)
strain relief
nr_nnain. ,s'
prong wim(green) terminals
Four-wErereceptacle
(NEMAType14-30R)
Do not use an extension cord with this dryer.
Do not connect plug end of power supply cord into a live
receptacle before connecting power supply cord to dryer
terminal block.
1. Disconnect power.
2. Remove hold-down screw and terminal block cover.
3. Attach a ¾-inch, U.L.-listed, strain relief to the hole
below terminal block opening. Strain relief should have
a tight fit with dryer cabinet and be in a horizontal
position. Put the power supply cord through the strain
relief.
Terminal blockcover Hold-downscrew
4. Remove the center terminal block screw. Remove the
neutral grounding wire (green/yellow wire) from external
grounding screw.
Externalground Centersilver-colored
connector, terminal blockscrew
/
Green/yeNow wire
of harooss
5. Connect neutral grounding wire and the neutral wire
(white) of power supply cord under the center screw of
terminal block.
6. Connect the other two insulated wires to outer terminal
block screws.
7. Connect the green, grounding wire from the power
supply cord to the external grounding conductor screw.
Tighten all terminal block screws firmly.
8. Tighten the strain relief screws.
9. Insert tab of terminal block cover into slot of the dryer
rear panel. Secure cover with hold-down screw.
Centersilver-colored
External terminalblockscrew
ground
connector
Greenwire/;'_
ofpowersupply I
cordorbare _._
copperwire
Neutral wire
(white)
%_ Neutral ground-
ing wire
(green_ellow)
_", U.L-listed,
strain relief
7
Loading ...
Loading ...
Loading ...