Loading ...
Loading ...
Loading ...
AiR FILTER
CAUTION: NEVER operate blow-
er without the air fil-
ter. The air filter must be kept clean. If it
becomes damaged, install a new filter.
To Clean Air Filter:
1. Loosen knob (A) holding air filter cover in place,
remove cover (B) and lift filter (C) from air box (Figure
20 & Figure 21).
2. Wash filter in soap and water. DO NOT USE GASO-
LINE!
3. Air dry filter.
4. Reinstall filter.
NOTE: Replace filter if frayed, torn, damaged or unable
to be cleaned.
Fig. 20
Fig, 21
1. Completely remove fuel cap from fuel tank (B) to be
able to remove fuel filter (C) from tank. Use a piece of
wire (C) with a hook formed at the end to pull filter
out of tank. (Figure 23)
2. Pull filter (D) off with a twisting motion. (Figure 24)
3. Replace fuel filter (D). (Figure 24)
NOTE: Never operate the blower without the fuel filter.
Internal engine damage could result!
Fig. 22
Fig. 23
C
FUEL CAP / FUEL FILTER
CAUTION: Removefuolfromunit
and store in approved
container before starting this procedure. Open
fuel cap slowly to release any pressure which
may have formed in fuel tank.
NOTE: Keep vent (A) on fuel cap clean of debris (Figure
22).
Fuel Filter:
B
D
Fig. 24
IDLE ADJUSTMENT
The carburetor was pre-set at the factory for optimum
performance. If further adjustments are necessary take
your blower to a Sears or other qualified service dealer.
14
Loading ...
Loading ...
Loading ...