Loading ...
Loading ...
Loading ...
5
47” Computer Desk
www.insigniaproducts.com
Assembling your desk
STEP 1: Attach the leg frames and bottom support bar
You n e ed :
1 Insert four crosshead nuts (B) into the desktop (1), making sure that the arrows are pointing toward the nearest side
edge.
2 Align a leg frame (2) with the holes on a side of the desktop, making sure that the hole near the foot is toward the
back of the desktop.
3 Insert two M6 × 60 mm bolts (A) through the leg frame and into the crosshead nuts (B) using the hex wrench (F).
4 Repeat steps 2–4 to attach the other leg frame.
5 Align the bottom support bar (3) with the holes on the bottom of the leg frames, then secure with two M6 × 35 mm
bolts (C) using the hex wrench (F). Make sure that the holes on the side of the support bar face the back of the
desktop (as shown).
Note: If the bottom support bar does not fit between the two leg frames, loosen the crosshead nuts and bolts to let the pieces
move more freely.
3
Bottom support bar
1
Desktop
2
Leg frames (2)
A
M6 × 60 mm bolts (4)
B
Crosshead nuts (4)
C
M6 × 35 mm bolts (2)
F
Hex wrench
B
a
c
k
wa
r
d
F
o
r
w
a
r
d
BACK
Loading ...
Loading ...
Loading ...