Loading ...
Loading ...
Loading ...
4
www.insigniaproducts.com
Hardware included
Tools needed
Preparing to assemble your desk
1 Follow the assembly instructions carefully.
2 Make sure that all parts and hardware are included.
3 To prevent product damage, assemble your desk on top of the box.
4 Have another person help you with lifting and assembly.
5 For the best results, do not fully tighten the screws until you have assembled all the other parts.
Installing crosshead nuts and bolts
1 Align the arrow on the crosshead nut toward to the hole on the edge of the piece, then insert the crosshead nut in
the hole.
2 Align the piece you need to connect, then screw a bolt into the crosshead nut with the hex wrench.
CAUTION: Do not use a drill to assemble your desk. The drill should only be used to secure your desk to the wall (step 3).
LABEL HARDWARE QTY.
A4
B4
C2
D2
E4
M6 × 60 mm
bolts
Crosshead nuts
M6 × 35 mm
bolts
M6 × 15 mm
bolts
4 × 25 mm
screws
LABEL HARDWARE QTY.
F1
G4
H2
I2
J2
Hex wrench
Washers
Wall straps
Wall anchors
4 × 40 mm
screws
Phillips screwdriver (PH2)
Drill with 1/4 in. (6 mm) bit
(For wall mounting only)
Hammer
Loading ...
Loading ...
Loading ...