Loading ...
Loading ...
Loading ...
Installation
Installation Notice
6
Warning
1.The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels,
the discharge of air must fulfill the requirements of local regulations.
2. ote that when installing the metal expansion pipe, the pipe shall match with the hole in size Overlarge hole isN .
prohibited, as it will result in loose pipe and accidental drops.
3.There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas
or other fuels.
4 If the flue aperture is less than air duct aperture, it will influence the fume suction effect and the too long air duct will.
influence the fume suction effect, too.
5 This appliance just for household use only.And it’s not allowed to exhaust dangerous or explosive matter or air. It should.
be put under dry and ventilation environment without dangerous air.
●Surrounding environment
Range hood shall be avoided to be installed at the place where there are many doors and windows since it will cause
too large cross ventilation so as to influence the oil fume exhaust effect-.
●Tool preparation
The following tools shall be prepared when range hood installation: 1. Electric impact drill (with drill);
;;2.Wrench 3.Screw driver 4.Ruler
Preparation Before Installation
●I and circuit setting must be operated by professionals with experiences and non-professionals shall notnstallation
assemble, disassemble and repair range hood.
●Don t connect power before installation it may cause electric shock',.
●If your kitchen is in decoration state, please do not expose the range hood outside since construction material, dust,
paint, coating and the gases they volatile will corrode the surface of range hood and the surface will be tarnished.
Therefore, it s suggested to assemble the range hood after decoration.'
● If gas hob needs to be removed before installing range hood, please turn off gas valve firstly.
●' .Don t install range hood on the wooden or other flammable wall The wall of installation range hood shall be on
the nonflammable enough stable smooth and level surface,, .
● Range hood may have very sharp edge, please wear protective gloves while moving the range hood for
installation cleaning or maintenance,.
●When drilling holes on the wall, the electric wire buried in the wall shall be avoided to prevent from fire.
●Range hood shall not be installed too high, nor shall it be disturbed by external air flow so that the fume suction effect
will not be influenced.
●Please retain installation space for hood while fabricating cupboard so as for the care and maintenance .
●Please keep the hood body level while installing the machine.
● (Please use single phase socket with earthing, which shall be well earthed. Water pipe grounding is not reliable.The
grounding of gas piping may cause the danger of fire and explosion.)
●Use appointed accessories for installation or range hood may fall down and cause danger.
● If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly,,
qualified persons in order to avoid a hazard Don t stretch, change ,tie, or press supply cord, or it may cause fire.'
or electric shock.
●, , .If finish installation clean range hood firstly then connect power and test run
Range Hood
Loading ...
Loading ...
Loading ...