Loading ...
Loading ...
Loading ...
1)Inordertooperatetheicemakerproperly,waterpressureof20-125 psi is required.
In this range a 170 cc (5.74ounces) paper cup can be filled in 10 secs.
2) The water filter removes particles. It does not sterilize or destroy any micro-organisms.
3) Ifthe refrigerator is installed in an area with low water pressure (below 20psi), you should install a
booster pump to compensate.
4) Ensure the water storage tank inside the refrigerator is properly filled initially. Push the water dis-
penser lever until the water runs from the outlet.
(_ watei line installation kit is available at extra cost from your dealer.The refrigerator
NOTE manufacturer recommends using a water supply kit containing copper tubing.
Connecting to water supply line
- Shut off the main water supply line and turn
the Ice maker to the off position.
- Locate the nearest cold drinking water line.
- Follow the instructions in the ice maker
installation kit.
- After connecting the water supply with water
filter, turn on water supply and flush 4 or
more gallons into a bucket to clear the water
filter
1. Cold Water line
_J ---t-----1 2. Pipe Clamp.
L_L-.-M___ 2 3. Water Line Installation Kit
I__ _-_. E--3 4. Shut Off Valve
!
26
Loading ...
Loading ...
Loading ...