Loading ...
Loading ...
Loading ...
23
BURNERS AND PAN SUPPORTS
■ They can be removed and washed only with soapy water.
Detergents can be used but must not be abrasive or corrosive.
Do not use abrasive sponges or pads. Do not put in dishwasher.
■ After cleaning, they must be well dried and correctly replaced.
■ It is very important to check that the pan supports have been correctly positioned.
Failure to do so can cause serious problems.
■ Check that the electrode “S” (gs. 12a, 13a) next to each burner is always clean to
ensure trouble-free sparking.
■ Check that the probe “T” (gs. 12a, 13a) next to each burner is always clean to ensure
correct operation of the safety valves.
■ The ignition plug and the probe must be very carefully cleaned.
■ Note: To avoid damage to the electric ignition do not use it when the burners are
not in place.
CORRECT REPLACEMENT OF THE AUXILIARY, AND SEMI-RAPID BURNER
It is very important to check that the burner ame spreader “F” and the cap “C” have been
correctly positioned (see gs. 13a and 13b). Failure to do so can cause serious problems.
■ They shall be level and the ame spreader must not rotate.
S
F
C
T
Figure 12a
T
S
F
C
Figure 12b
Loading ...
Loading ...
Loading ...