Loading ...
Loading ...
Loading ...
GDZS-I manual 10/22/01 11:44 AM Page/_l_\
£ne[gy Saving Tips
• Keep the lintscreen clean and exhaust the dryer properly
• Sort load batches properly and select proper temperature and cycle settings,
• Avoid overloading, adding wet clothes to a partially dry load and over drying.
• If you have multiple loads to dry, try to dry one load after another right away to
take an advantage of a warm dryer. This way you already have a warm dryer
and you save some time for drying,
• Do not open door needlessly because it causes warm/hot air to escape; which
prolongs drying time.
• Use dryer during low humidity because it will be a normal drying time due to
very less moisture in the air than during high humidity days where the air is
very moist.
• Lint filter needs to be cleaned before and after each use for
your unit to operate at optimum efficiency. The filter can be slid out,
by pulling on the tab located on the inside of the dryer door. The filter
may be washed or vacummed. Remove the excess water from the filter
by gently shaking the filter. This will remove dust and particles trapped
in the filter. Lint build-up in screen restricts air flow, which causes
longer drying times, After cleaning, slide the filter back in place.
DO NOT USE YOUR DRYER WITHOUT THE LINT FILTER.
• Do not use any type of spray cleaner when cleaning the interioc
Hazardous fumes or electric shock could occur.
• Clean cabinet with mild soap and water. Do not use harsh or abrasive
cleaners, as this could damage the dryer,
• Clean the duct and the vent on a regular basis to avoid clogging which
could affect the efficiency of the dryer.
13
Loading ...
Loading ...
Loading ...