Loading ...
Loading ...
Loading ...
4
ASSEMBLY INSTRUCTIONS
1
3. Attach the mounting bracket to the outlet box (not
included) using the two outlet box screws from the
hardware bag.
2. Remove the two mounting screws from the sides of the
canopy and remove the mounting bracket.
4. Loosen the ground screw preassembled to the
mounting bracket. Wrap the Green/Bare (ground) supply
wire around the shaft of the ground screw. Re-tighten the
ground screw.
Mounting
Bracket
Ground
Screw
Outlet Box
Screw
Green/Bare (ground)
3
2
4
Mounting
Screw
Mounting Bracket
Canopy
1.Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER: Failure to disconnect the power supply prior to
installation may result in serious injury or death.
Loading ...
Loading ...
Loading ...