Loading ...
Loading ...
Loading ...
Starting a Flight
1 From the watch face, press START.
2 Select FLY.
3 Go outside and wait while the device locates satellites.
4 Press START to start the flight timer.
NOTE: Your activity data is recorded only while the flight timer is running.
5 Start your activity.
6 After you complete your activity, press STOP, and select Save.
Viewing Your SpO2 Readings in Flight
CAUTION
The SpO2 readings are intended for backup information only. Always defer to applicable flight instruments for
primary awareness.
The MARQ device has a wrist-based pulse oximeter to gauge the saturation of oxygen in your blood (SpO2).
During a flight, the device automatically takes pulse oximeter readings more frequently, so you can monitor your
SpO2 percentage.
TIP: You can improve the accuracy of your SpO2 readings by turning on all-day acclimation mode in the pulse
oximeter widget settings (Turning On All-Day Pulse Oximeter Readings, page 56).
During a flight, scroll up or down to view the SpO2 data screen.
Your most recent reading appears as an oxygen saturation percentage and position on the color gauge.
NOTE: If you are too active for the device to determine your oxygen saturation, dashes appear instead of a
percentage. You should remain stationary for up to 30 seconds while the device reads your blood oxygen
saturation.
Navigating to the Nearest Airport
1 Hold BACK.
A list of the nearest airports appears.
2 Select an airport.
3 Select Direct-To to begin navigation.
6 Flying
Loading ...
Loading ...
Loading ...