Loading ...
Loading ...
Loading ...
Setting the Barometric Pressure Manually
You can set the current barometric pressure manually. This can help to improve the accuracy of the pressure
altitude reading.
1 Hold MENU.
2 Select Aviation > Altimeter Settings & Alerts > Barometer > Manual.
3 Select UP or DOWN to set the current barometric pressure.
Viewing NEXRAD Weather Radar
Before you can view NEXRAD weather radar, you must pair your device with your smartphone (Pairing Your
Smartphone with Your Device, page 4).
You can view the weather radar image associated with your current location.
NOTE: You can customize the NEXRAD Tiles option in the Aviation settings to download additional weather
radar images based on a direction from your current location (Aviation Settings, page 82).
1 At any time, hold DOWN and START at the same time.
The device downloads a square of radar data for your current GPS position, outlined in magenta. The radar
data is active for 5 minutes.
NOTE: If you are near the border of the square, you may not see all applicable radar data.
2 If necessary, hold DOWN and START to download new data.
Flying Activity
A flying activity starts automatically when your detected climb rate exceeds the value you set in the auto fly
settings. The default auto fly value is 500 fpm.
You can set up your MARQ device to automatically connect to a paired Connext
®
device when a flying activity
starts. This allows your MARQ device to display aircraft information.
Setting the Auto Fly Value
1 Hold MENU.
2 Select Activities & Apps > FLY.
3 Select the activity settings.
4 Select Auto Fly.
5 Select the auto fly value.
A flying activity starts automatically when your detected climb rate exceeds this value.
Flying 5
Loading ...
Loading ...
Loading ...