Sencor SFN 4040SL Metal Pedestal Fan

User Manual - Page 9

For SFN 4040SL.

PDF File Manual, 10 pages, Read Online | Download pdf file

SFN 4040SL photo
Loading ...
Loading ...
Loading ...
Pedestal Fan
SFN 4040SL
EN
EN-9
2019 12/2019
Setting the vertical tilt angle of the motor unit
■ Before setting the vertical tilt angle of the motor unit A3, rst turn o the fan. Set the desired angle of the motor
unit A3 and then you may start the fan again.
Note:
The motor unit A2 may only be tilted up and down in alimited range. Do not set the tilt angle of the
motor unit A2 by force.
Setting the height of the fan
■ Turn o the fan before setting its height. Use one hand to rmly hold the bottom part of the extensible pole A8
and use the other hand to release the inner extension lock A9 by turning the locking screw anticlockwise. Slide
the top part of the extensible pole A8 in or out to set the desired fan height. To lock the set height in place, tighten
the locking screw clockwise.
CLEANING AND MAINTENANCE
■ Before cleaning it, make sure that the appliance is turned o and disconnected from the power socket.
■ Regularly remove dust from the appliance. For normal cleaning, aclean, dry cloth is sucient. In the event that it
is dirtier, disassemble the appliance and then wipe the individual parts with awiping cloth slightly dampened in
asolution of warm water and neutral detergent. Then wipe everything so that it is thoroughly dry. Make sure that
when cleaning, no water leaks into the motor unit A3.
■ Do not submerge the appliance or its power cord in water and do not wash it under running water.
■ For cleaning do not use steel wool, cleaning products with an abrasive eect, petrol and other solvents.
STORAGE
■ If you will not be using the fan for an extended period of time, store it in aclean, dry place or disassemble it and
put it back into the box.
TECHNICAL SPECIFICATIONS
Rated voltage range ............................................................................................................................................................................... 220−240 V
Rated frequency ................................................................................................................................................................................................ 50 Hz
Rated power ..........................................................................................................................................................................................................50 W
Electrical shock protection class ........................................................................................................................................................................... II
Noise level .......................................................................................................................................................................................................61 dB(A)
Maximum fan ow rate ....................................................................................................................................................................59.90 m
3
/min
Service value ..................................................................................................................................................................................1.37 (m
3
/min)/W
Maximum air velocity .................................................................................................................................................................................3.21 m/s
Measurement standard for service value .............................................................................................IEC 60879:1986, EN 50564:2011,
...........................................................................................................................................EN 60704-2-7:1998, EN 60704-1:2010, +A11: 2012
Contact details for obtaining more information .......................................................................FAST ČR, a. s., Černokostelecká 1621,
................................................................................................................................................................................. 251 01 Říčany, Czech Republic
The declared noise emission level of the appliance is 61dB(A), which represents alevel Aof acoustic power with
respect to areference acoustic power of 1pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – electrical shock protection is provided by double or heavy-duty insulation.
We reserve the right to change text and technical specications.
Loading ...