Loading ...
580
557
477
500
38
Ventilation slot
>
30mm
Appliances with three-pole cable are set up for operation with alternating current at the voltage
the rating plate Look at the connection wiring diagram. The earth
The connection to the electricity supply must be made by a qualified
When the appliance is to be installed above a
Cleaning
and frequency indicated on
conductor is yellow/green.
person and following the regulations in force.
built-in oven, the two appliances must be connected separately.
The supply cable must be so positioned that no point can reach a temperature 50° C higher
Also check that the supply system has an effective earth connection
easily when the appliance is installed.
The connection cable must be secured in a strain-Relief clamp.
Caution!
Remember to connect the safety circuit to the connection box terminal marked with
cut off in case of emergency. The distance between the working
switch must be at least 3 mm. Before connecting the cooker to the power supply it is
important to read the information on the data plate and the connection diagram.
The manufacturer will not accept any responsibility if the applicable standards are
not respected.
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
Wire must be connected to the
E terminal.
Recommended
type of
connection
lead
For 220-240V earthed one-phase
connection, bridges connect L
terminals and terminals, safety
wire to
N
L
E
N
L
N
than ambient temperature.
and corresponds to the standards in force and that the
plug (or omnipolar switch) can be reached
The electricity supply for the hob
must have a safety switch which enables the power to be
contacts of the safety
TROUBLESHOOTING
PROBLEM CHECKLIST
Hob does not work
Check the wiring connection
Check the fuse and voltage
Smoke when hob is on
•
This is normal on first use
•
Damaged wire
•
Contact service provider and do not attempt
to use
•
•
Turn off the mains before carrying out any maintenance and wait for the hob to cool down.
We advise using lukewarm water and detergent to clean enamelled elements. Never use
abrasive products. Rinse the stainless steel with water and dry using a soft cloth. Use
sponges or a moist cloth to clean the tops and remember that water can damage electric
parts. Clean tough stains using non-abrasive detergents, or warm vinegar.
Important Notice
After use, a discolouration of the stainless steel hotplate rims is to be expected and cannot
be avoided. This does not affect its operation.
TECHNICAL INFORMATION FOR INSTALLATION (Qualified Personnel Only)
Electrical Connection
Fitting Guidelines
The voltage rating of the hob heating elements is 220-240V. Adapting the hob to operate
with one-phase current is possible by appropriate bridging in the connection box according
to the connection diagram below. The connection diagram is also shown on the cover of the
connection box. Remember that the connection wire should match the connection type and
the power rating of the hob.
This appliance must be installed only by authorised personnel and in accordance with
Australia and New Zealand regulations. The surfaces must be capable of sustaining
temperatures of 80°C. All laminates, fixing adhesive and surface materials should be
certified suitable for this temperature.
According to the diagrams below, cut a hole in the worktop and insert the hob. The hob can
be fitted to any worktop with a thickness of 40mm or 50mm.
Please note the following:
1. Fire resistant material (eg. ceramic tiles) is required to a height of 450mm above the hob
top and wall or vertical structures are not permitted within 200mm of the hotplates.
2. No overhang or cooker hood is permitted within 650mm distance in height above the
hotplates.
3. Leave at least 50mm clearance between the underside of the appliance and any
combustible area.
4.Never leave packaging components (plastic bags, polystyrene etc) within reach of
children.
Clean area around hotplates
Correct Disposal of this Product
This marking indicates that this product should not be disposed of together with other
household waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material sources. To dispose of your unwanted product, please use your local return
and collection systems or contact the retailer where the product was purchased. The
retailer will be able to dispose of the product in a safe and environmentally-friendly
manner.
650-750
4
5
6
7