Loading ...
Loading ...
Loading ...
MICROWAVEOVENFEATURES
Your microwave oven is designed to make your
cooking experience as enjoyable and productive as
possible. To help get you up and running quickly,
the following is a list of the oven's basic features:
1, Door Handle. Pull to open door.
2. Door Safety Lock System. The oven will not
operate unless the door is securely closed.
3. Window with Metal Shield. Shield prevents mi-
crowaves from escaping. It is designed as a
screen to allow you to view food as it cooks.
4. Cooking Rack. Use for extra space when
cooking in more than one container at the same
time. See page 18 for more information.
5. Glass Turntable (PN 4393751) (not shown). In-
cluded in oven cavity - see below for installation
instructions. This turntable turns food as it cooks
for more even cooking. It must be in the oven
during operation for best cooking results. The
turntable is sunken into the cavity floor to give
you more cooking space and better cooking
results. See pages 9, 12, 36, 41, and 43 for more
details.
6. Charcoal and Grease Filters. Included in oven
cavity. See page 37 for installation instructions
and cleaning information.
7. Cooktop/Countertop Light. Turn on to light
your cooktop or countertop or turn on as a night
light. See page 19 for more information.
8. Cooking Guide Label. Use as a quick reference
for Quick Cook, Quick Reheat, Quick Defrost,
and Sensor Cook settings.
9. Exhaust Fan and Cooktop Light Switches.
See page 19 for more information.
10, Control Panel. Touch the pads on this panel to
perform all functions. See pages 14-17 for more
information.
11. Vent Grille.
12. Oven Cavity Light.
13. Microwave Inlet Cover.
14. Model and Serial Number Plate. See page 2
for more information.
Toinstallturntableandsupport:
Fit the hub (PN 4393754 _onto the shaft.
Raised,
curved_
lines f-_Y_-'%,_
_"_.--- Shaft
Place the support
(PN 4393752) on the
cavity bottom.
Place the turntable
on the hub. Make sure
the raised, curved lines
in the center of the
turntable bottom are
between the three
"spokes" of the hub.
The rollers (PN 4393753) on the support should fit
inside the ridge on the bottom of the turntable.
The turntable turns both clockwise and counter-
clockwise. This is normal.
13
Loading ...
Loading ...
Loading ...