fold here fold here fold here fold here fold here fold here
OPERATION
DRYING
CHANGING THE PROGRAM SEQUENCE
Before commissioning the tumble
dryer for the first time, make sure it has
been installed correctly. Connect it cor-
rectly.
Please read the separate operating in-
structions supplied with the appliance.
Damage caused by switching the ap-
pliance on too soon.
The heat pump can be damaged.
After installing the tumble dryer, wait for at
least one hour before starting a drying
program.
Switching on the tumble dryer
Press the button.
The welcome screen will light up.
The display will guide you step by step
through the initial commissioning process.
For additional information please refer to the
separate operating instructions supplied.
Energy savings
- Spin the laundry at the maximum spin
speed in the washing machine
- Dry a full load size
- Keep room temperature not too warm
- Clean the lint filters
Touch display and sensor buttons
The and Start/Stopsensor buttons and
the sensor buttons in the display react to
finger tip contact.
The touch display can be scratched by
pointed or sharp objects, e.g., pens.
Only touch the display with your fingers.
a
sensor button
Takes you back one level in a menu.
b
Touch display
c
Start/Stopsensor button
Touching the Start/Stopsensor button
starts the selected program or cancels
a program that has already been
started. The program can be started as
soon as the sensor button is flashing on
and off. The sensor button lights up
constantly once the program has
started.
d
Optical interface
For Service.
e
button
For switching the tumble dryer on and
off. The tumble dryer switches off auto-
matically to save energy. This occurs
15minutes after the end of the pro-
gram/Anti-crease phase, or after being
switched on if no further selection is
made.
Main menu
After switching on the tumble dryer, the
main menu will appear in the display. You
can access all the important submenus from
the main menu. Touch the sensor button
at any time to return to the main menu. Val-
ues set previously are not saved.
Programs
For selecting drying programs.
Favorites
You can save your own customized drying
programs.
MobileStart
With MobileControl you can operate your
tumble dryer remotely with the Miele app.
Drying Assistant
The Drying assistant guides you step by
step so that you can select the optimum
drying program for your laundry.
Settings
You can alter the tumble dryer’s electronics
to suit changing requirements in the Set-
tingsmenu.
Operating the touch display
Scrolling
You can scroll to the right or the left by
swiping your finger across the screen. The
orange scroll bar under the pictures shows
that there are additional options to choose
from.
Options
Touch an option in the menu to select it. If
there are multiple options, the selected op-
tion will be highlighted in orange.
Pull-down menu
Touch the top edge of the screen in the
middle and drag down with your finger.
Preparing the laundry
Damage due to foreign objects which were not re-
moved from the laundry.
Foreign objects can melt, burn, or explode.
Ensure that any foreign objects (e.g., detergent dis-
pensing balls, loose bra wires, lighters) have been re-
moved from the laundry.
Fasten duvet covers and pillow cases to prevent small
items from being rolled up inside them.
Loading the tumble dryer
Do not overload the drum. Overloading can give a disap-
pointing drying result and cause unnecessary wear and
tear to the laundry. It can also cause more creasing.
Loosen the laundry.
Open the tumble-dryer door.
Check that the drum is empty.
Load the laundry in the drum.
Insert the fragrance flacon.
If you are drying without a fra-
grance flacon, close both sock-
ets. Push the tabs on both covers
to the bottom (see arrows).
Shut the tumble-dryer door gen-
tly.
Risk of damaging laundry.
When closing the door, make
sure that laundry does not get
trapped in the door opening.
1
Condensed-water container
2
Door
3
Control panel
4
Plinth-filter flap
5
Grille for cold-air intake
1. Selecting a program
Touch the Programssensor button.
11:02
0:00
0:00
0:00 0:00
h
h
h
h
Programs
Normal
DelicatesExpress
Wrinkle-free
Help
Scroll to the right in the display until the program you
want appears.
11:02
2:35
Overview
Normal
h
Timer Save
Drying level
Normal
Extras
not selected
Touch the sensor button for that program.
You can change the drying level or the Duration.
The display will change to the Overviewmenu.
There are 3additional ways of selecting a program.
1. Favorites
2. Drying assistant
3. MobileStart
2. Selecting program settings
Tip: The condensed-water container must be filled to use
certain programs.
Selecting the drying level
Drying levels can be selected for certain programs as per
the “Program overview” table.
Touch the Drying levelsensor button.
Scroll in the display until the drying level you want ap-
pears.
Touch the sensor button for the drying level.
Selecting the program cycle time
You can select a program cycle time for the
Time Dry, Cold Air, Basket, and
DryFreshprograms.
Touch the Durationsensor button.
Place your finger on the number that you
want to change and move your finger in
the direction you want.
Confirm with the OKsensor button.
Selecting an extra option
Extra options can be selected for certain
programs as per the “Program overview”
table.
Touch the Extrassensor button.
Touch the sensor button for the extra op-
tion you want.
Confirm with the OKsensor button.
Freshen up
Odors are reduced or removed from clean
(dry or damp) clothing.
Gentle
Delicate fabrics with the symbol on the
care label, e.g., acrylic garments, are dried
at a lower temperature.
3. Starting a program
Touch the flashing Start/Stopsensor but-
ton.
The Start/Stopsensor button lights up and
the program starts.
Adding or removing laundry
You have forgotten an item of laundry, but
the program has already started.
Touch the Add laundrysensor button*.
Add laundry and The door can be opened.
light up in the display. The Start/Stopsen-
sor button will flash slowly.
Open the tumble-dryer door.
Add or remove laundry items.
Close the door.
Touch the Start/Stopsensor button.
The program starts.
* Exceptions
In some cases – for example, during the
cooling phase or the Proofingprogram – it
is not possible to add laundry items.
Canceling the current program
You cannot change to another program
once a program has started. This prevents
the appliance being operated unintention-
ally.
You will need to cancel the current program
before you can select a new one.
Touch the Start/Stopsensor button.
The following will appear in the display:
Cancel the program?
Select yes.
The following will appear in the display: Pro-
gram cancelled
Open and close the tumble-dryer door.
Select a program.
Touch the Start/Stopsensor button.
Program end
The program is finished when Finish/Anti-
crease appears in the display. The Start/
Stopsensor button will no longer light up.
- 10minutes after the end of the program,
the Start/Stopsensor button will begin to
flash slowly and the display will go out.
- The tumble dryer switches off automati-
cally.
Do not open the tumble-dryer door before
the end of the program.
Open the door.
Remove the laundry.
Items left in the tumble dryer could be
damaged by over-drying when the dryer is
used the next time.
Always remove all items from the drum.
If the tumble dryer is switched on at the
power supply and the door is opened, the
drum lighting will come on. The drum light-
ing will go out after a few minutes to save
energy.
Switch the tumble dryer off with the
button.
Clean the lint filters.
Close the drum door.
Empty the condensed-water container.
Emptying the condensed-water
container
Empty the condensed-water container af-
ter every drying program.
The Empty the container or check the
drain.indicator will light up if the maximum
level of the condensed-water container is
reached.
Open and close the door to deactivate
this message.
Remove the con-
densed-water
container.
To prevent water running out, hold the
condensed-water container by the front
panel and at the back to keep it in a hori-
zontal position.
Empty the con-
densed-water
container.
Replace the con-
densed-water
container in the
tumble dryer.
Filling the condensed-water
container
The condensed-water container must be
filled to the -min-marker for the Soft-
Steamprogram.
With the condensed water draining exter-
nally, the condensed-water container is
empty. Only fill with commercially available
condensed water.
To stop the spray jet becoming calcified,
only fill with tap water in exceptional cir-
cumstances.
Tip: This tumble dryer has 2 sockets for
inserting fragrance flacons. You can use
one or both sockets to give your laundry a
pleasant scent.
Close the unused socket.
Before using a fragrance flacon, please
read “IMPORTANT SAFETY INSTRUC-
TIONS – Using a fragrance flacon (op-
tional accessory)” and “Fragrance flacon”
in the operating instructions.
Inserting a fragrance flacon
1. 2.
3. 4.
Marker must be in position .
5. 6.
Turn the outer ring clockwise a little.
Marker must be in position .
Setting the fragrance intensity
The further you
turn the outer ring
of the fragrance
flacon clockwise,
the more intense
the fragrance.
Closing the fragrance flacon
Turn the outer
ring counter-
clockwise until
marker is in
position.
Removing the fragrance flacon
Turn the outer
ring until marker
is in position
.
Remove the fragrance flacon.
To prevent any fragrance running out of
the flacon, do not lay it down on any
surface.
Only store the fragrance flacon in its
original packaging.
Before the first use Operation Drying Program end FragranceDos
fold here fold here fold here fold here fold here fold here
en-US
M.-Nr. 11 631 620
TXR 860 WP
Loading ...
