Loading ...
Loading ...
Loading ...
,_WARNING: The blade contin-
ues to spin after the throttle is re-
leased or engine is turned off. The
coasting blade can throw objects or
seriously cut you if accidentally
touched. Stop the blade by contacting
the right hand side of the coasting
blade with material already cut.
Stop coasting /,_ "%_
blade by contact %, .,_1_;:_t7
with cut material, o_"
,_ WARNING: Inspect the area to
be cut before each use. Remove ob-
jects (rocks, broken glass, nails, wire,
etc.) which can be thrown or become
entangled in the blade or trimmer line.
• Throw away and replace blades that
are bent, warped, cracked, broken
or damaged in any other way.
• Install required shield properly be-
fore using the unit. Use the metal
shield for all metal blade use.
_ILWARNING: Only use brushcut-
ter attachments that provide a metal
shield with protruding nose.
Protruding
• Use only specified blade and make
sure it is properly installed and se-
curely fastened.
• Cut from your right to your left.
• Always use the handlebar and a
properly adjusted shoulder strap
with blade (see ASSEMBLY instruc-
tions in brushcutter attachment oper-
ator's manual).
CULTIVATOR SAFETY
'_ WARNING: Rotating tines can
cause serious injury. Keep away from
rotating tines. Stop the engine and
disconnect the spark plug before un-
clogging tines or making repairs.
,_ WARNING: Inspect the area to
be cultivated before starting the unit.
Remove all debris and hard and sharp
objects such as rocks, vines, branch-
es, rope, string, etc.
• Avoid heavy contact with solid objects
that might stop the tines. If heavy con-
tact occurs, stop the engine and in-
spect the unit for damage.
• Never operate the cultivator without
the tine cover in place and properly
secured.
• Keep the tines and guard clear of
debris.
• After striking a foreign object, stop
the engine, disconnect the spark
plug and inspect the cultivator for
damage. Repair before restarting.
• Disconnect attachment from the
drive engine before cleaning the
tines with a hose and water to re-
move any build-up. Oil the tines to
prevent rust.
• Always wear gloves when servicing
or cleaning the tines. The tines be-
come very sharp from use.
• Do not run unit at high speed unless
cultivating.
HEDGE TRIMMER SAFETY
DANGER: RISK OF CUT; KEEP
HANDS AWAY FROM BLADE - Blade
moves momentarily after the trigger is
released. Do not attempt to clear
away cut material when the blade is in
motion. Make sure engine is stopped,
the spark plug wire is disconnected,
and the blade has stopped moving
before removing jammed material
from the cutting blade. Do not grab or
hold the unit by the cutting blade.
Loading ...
Loading ...
Loading ...